单选题Your x86-based server will not boot Solaris 10 OS. You discover that you need to restore your pboot and boot block on the / （root） slice located on disk c0d0. You first boot off of the CD-ROM or DVD into single user mode. What commands should you run

题目内容(请给出正确答案)

单选题

Your x86-based server will not boot Solaris 10 OS. You discover that you need to restore your pboot and boot block on the / （root） slice located on disk c0d0. You first boot off of the CD-ROM or DVD into single user mode. What commands should you run to restore the pboot and boot block on the slice？（）

如果没有搜索结果或未解决您的问题，请直接联系老师获取答案。

更多相关问题

第1题

Your Windows 2000 Server computer named EzonexamSrv contains a single 18-GB hard disk. The drive is configured as a basic disk and has two partitions. Partition C is 2 GB in size and contains the operating system files. Partition D is 16 GB in size and contains user data that is updated frequently.Both partitions are formatted as NTFS. Both partitions are backed up to a tape every evening at 10:00 P.M.You have a current Emergency Repair Disk (ERD) for EzonexamSrv, and the Recovery Console is installed on the computer.One day at4:00 P.M., the server fails. You attempt to restart EzonexamSrv, but you receive the following error message:"Boot disk or operating system not found".You use Recovery Console to discover that the files on partition C are corrupted.You need to recover EzonexamSrv from the failure as quickly as possible. You also must recover as much user data as possible.What should you do?A．Use the ERD to start the computer. Replace the corrupted files on partition C by copying them from a Windows 2000 Server CD-ROM.B．Boot the Recovery Console. Copy any files that have changed since 10:00 P.M. the previous evening to a second server. Use the most recent tape backup to restore the remaining user data to the second server.C．Start the computer by using a Windows 2000 Server CD-ROM. Select the Repair option in Setup.D．Install a second hard disk in the computer. Install Windows 2000 Server on the new hard disk. Re-create the shared folders on the first hard disk.

点击查看答案
第2题

You are the administrator of a Windows 2000 Server network. On each server, you format a separate system partition and a separate boot partition as NTFS.Several months later, you shut down one of the servers for the maintenance. When you try to restart the server, you receive the following error message "NTLDR is missing. Press any key to restart".You want to install a new NTLDR file on the server, but you do not want to lose any settings you made since the original installation. What should you do?A．Start the computer by using the Windows 2000 Server CD-ROM and choose to repair the installation. Select the Recovery Console and copy the NTLDR file on the CD-ROM to the root of the system volume.B．Start the computer by using the Windows 2000 Server CD-ROM and choose to reinstall. When installation is complete, copy the NTLDR file to the root of the boot volume.C．Start the computer by using a Windows 2000 bootable floppy disk. From the command prompt, run the sfc/scanboot command.D．Start the computer by using a Windows 2000 bootable floppy disk. Run the File Signature Verification utility.

点击查看答案
第3题

Your network includes Windows 98 computers and Windows 2000 Server computers. You are adding a new computer to the network, and you plan to install Windows 2000 Server on the new computer. The computer has one 20-GB hard disk with no partitions defined.The Windows 2000 Server CD-ROM is unavailable. You want install Windows 2000 Server from source files that are located on a server on the network. You also want the entire hard disk of the new computer to be used for the system partition.What should you do?A．On another Windows 2000 computer, use Makebt32.exe to create installation startup disks. Start the new computer by using the first disk.B．On another Windows 2000 computer, format a floppy disk. Copy NTLDR, Boot.ini, Ntdetect.com, Ntbootdd.sys to this disk. Start the new computer by using the disk.C．Start the new computer by using a Windows 98 network boot disk. Connect to the network server. Run Dsclient.exe. Create and format a 20-GB FAT32 partition.D．Start the new computer by using a Windows 98 network boot disk. Create and format a single FAT32 partition. Connect to the network server. Run Winnt.exe.E．Start the computer by using a Windows 98 network boot disk. Create and format a single FAT32 partition. Start the new computer by using a Windows 2000 Emergency Repair Disk.

点击查看答案
第4题

You are preparing to install Windows 2000 Server on a new computer. The computer is connected to a network that includes Windows 98 computers and Windows 2000 Server computers.You want to install Windows 2000 Server from source files that are located on a server on the network.What should you do?A．Start the new computer by using a Windows 98 network boot disk. Connect to the network server. Run Winnt32.exe.B．Start the new computer by using Windows 98 network boot disk. Connect to the network server. Run Winnt.exe.C．On a Windows 2000 Server computer, use Makebt32.exe to create installation startup disk. Start the new computer by using the first disk.D．On a Windows 2000 computer, format a floppy disk. Copy NTLDR, boot.ini, Ntdetect.com, Ntbootdd.sys to this disk. Start the new computer by using the disk.

点击查看答案
第5题

You perform a clean installation of Microsoft Windows Vista on the first partition. Then, you install Microsoft Windows XP Professional on the second partition of the same machine.You are able to log on to Windows XP Professional but do not have the option to boot to Windows Vista.You need to be able to dual boot the computer.What should you do?（）A.AB.BC.CD.D

点击查看答案
第6题

Your network consists of a single Active Directory domain. All network servers run Windows Server 2003Service Pack 2 (SP2).A server hard disk drive fails. You replace and configure the hard disk drive and use Windows Backup to start a data restore.When you start the restore, you receive the following error message.You need to restore the data on the server. The solution must create the same directory structure that existed beforethe disk failure.What should you do? （）A. Catalog the backup file.B. Restore the backup to a single folder.C. Restore the files to the original location.D. Restore the backup to an alternate location.

点击查看答案
第7题

You want to perform in incomplete recovery of your database. You plan to use these commands to recover your database： SET UNTIL TIME = ’2000-12-09：11：44：00’； RESTORE DATABASE； RECOVER DATABASE； How should the commands be executed？（）A、Only the SET command must be within a RUN block.B、All commands should be executed at the RMAN prompt.C、All three commands must be within a single RUN block.D、Only the RESTORE and RECOVER commands must be within a single RUN block.

点击查看答案

单选题Your x86-based server will not boot Solaris 10 OS. You discover that you need to restore your pboot and boot block on the / （root） slice located on disk c0d0. You first boot off of the CD-ROM or DVD into single user mode. What commands should you run

题目内容(请给出正确答案)

更多相关问题

第1题

第2题

第3题

第4题

第5题

第6题

第7题

相关内容