英译中:Gateway
● 以下的命令中,可以为交换机配置默认网关地址的是 (57) 。(57)A. 2950(config)# default-gateway 192.168.1.254B. 2950(config-if)# default-gateway 192.168.1.254C. 2950(config)#ip default-gateway 192.168.1.254D. 2950(config-if)#ip default-gateway 192.168.1.254
点击查看答案
Which functionality in the Cisco IOS software will enable a router to permanently act as a call agent for phones? ()A、Cisco CallManagerB、Cisco CallManger Express (CME)C、Cisco CallManager Gateway (CMG)D、Cisco CallManager Voice Gateway (CMVG)E、Media Gateway Control Protocol (MGCP)
以下的命令中,可以为交换机配置默认网关地址的是()。A、2950(config)#default-gateway192.168.1.254B、2950(config-iF.#default-gateway192.168.1.254C、2950(config)#ipdefault-gateway192.168.1.254D、2950(config-iF.#ipdefault-gateway192.168.1.254
英译中:Storing
GPRS手机为了WAP浏览必配的参数是()A、WAP Gateway IP/Port Number/APN B、WAP Gateway IP/Port Number/Dial-in Number C、WAP Gateway IP/APN/Username/Password D、WAP Gateway IP/Dial-in Number/Username/Password
The vPC peer-gateway capability allows a vPC switch to act as the active gateway for packets that are addressed to the router MAC address of the vPC peer. This feature enables local forwarding of such packets without the need to cross the vPC peer link. Which statements are true about the vPC peer-gateway? () A、 The vPC peer-gateway feature is enabled by default.B、 The vPC peer-gateway feature can be configured globally under the vPC domain submode.C、 Enabling the peer-gateway feature automatically disables IP redirects on all interface VLANs mapped over a vPC VLAN to avoid generation of IP redirect messages for packets switched through the peer gateway router.D、 The vPC peer-gateway feature only works with HSRP protocol.
Your network contains a server named Server1. Server1 runs Windows Server 2008 R2 and has a single network connection. The connection is configured to use a default gateway address of 10.0.0.1.The default gateway has a metric value of 100.You configure a second default gateway that uses an address of 10.0.0.2.You need to ensure that 10.0.0.2 is only used as the default gateway if 10.0.0.1 is unreachable. What should you do?()A、For the interface, set the interface metric to 100.B、For the 10.0.0.2 gateway, set the metric to 50.C、For the 10.0.0.2 gateway, set the metric to 200.D、For the 10.0.0.1 gateway and the 10.0.0.2 gateway, enable automatic metric.